Barswitches

Fits Motorcycles and Quads from Suzuki, Honda, Kawasaki, Yamaha
CNC machined from 6061-T6 Aircraft Grade Aluminum
Stainless Steel screws included

The PMR Barswitch was designed to make it simple to add switches to your motorcycle. No more trying to find a place to mount switches. And you don't have to move things around on your handlebar. The PMR barswitch is easy, it replaces the cap that holds the clutch or brake assembly on the handle bar. These switches can be used for many things like turning on or off nitrous, purging nitrous, Turbo controls, lights, fans other electronics etc. We have even see people wire their garage door openers to them. The switches are On-Off switchs and can handle up to 10 amps.

This PMR Barswitch fits all brand of motorcycles with the clutch assemblies for 7/8 handle bars made by Nissin (look on the back of your assembly you should see the name NISSIN somewhere)

Single Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
PM-53 can be used on clutch or brake side with 32mm bolt spacing.
Bikes that we know it fits both clutch and brake side.
Hayabusa, ZX14
Bikes that it fits brake side
Hayabusa, ZX14, GSXR's, ZX10, R1, R6, Katana, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.

Double Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
Bikes that it fits clutch side
Hayabusa, ZX14, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.

Triple Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
Bikes that it fits clutch side
Hayabusa, ZX14, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.

Many people have asked us to make a back barclamp so they can mount our barswitches or killswitches on any bike with a 7/8 diameter handlebar. So here it is! This will allow you to mount any killswitch or 2 bolt (hydraulic bolt pattern PM-53, PM-50, PM-54, PM-45, PM-47 etc) Barswitch made by PMR. Many people use this for drag bikes with no clutch lever or you can now add switches to dirtbikes or quads. We use this to mount switches on our KTM dritbike(see picture below). One switch is used for the 8" HID headlight and the other is used for the fan)
This is CNC machined and then black anodized to match the barswitches and killswitches.

Triple Switch for Cable clutch with single pinch bolt on the bottom of the clutch mount.
Bikes that it fits clutch side
GSXRs, Katana, R1, R6
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.

This is not a cheap back clamp. It is quality! It is strong. It is CNC machined Aircraft aluminum then anodized to match the barswitches.