Contents:
Cover and 2 screws (depending on part number there might be 2 covers and 4 screws)
First cover paint with
plastic or a towel, you do not want to get brake or clutch fluid on any paint.
If you are installing polished covers try not
to touch the polished surface, use the plastic they come wrapped in to protect the cover from scratches and finger prints.
1. Remove stock cover.
2. Install new cover.
3. Use new stainless
screws.
4. Do not over tighten screws.
5. That was easy
now do the same for the other cover (if your bike has two)
If you have any questions please email us
