PMR Barswitch
pmrweb045023.gif
pmrweb045022.jpg
PMR Barswitch replaces the bracket on the left.
Patents Pending
The PMR Barswitch was designed to make it simple to add switches to your motorcycle. No more trying to find a place to mount switches. And you don't have to move things around on your handlebar. The PMR barswitch is easy, it replaces the cap that holds the clutch or brake assembly on the handle bar. These switches can be used for many things like turning on or off nitrous, purging nitrous, Turbo controls, lights, fans other electronics etc. We have even see people wire their garage door openers to them. The switches are On-Off switchs and can handle up to 10 amps.
  1. Fits Motorcycles and Quads from Suzuki, Honda, Kawasaki, Yamaha
  2. CNC machined from 6061-T6 Aircraft Grade Aluminum
  3. Stainless Steel screws included
  4.  4. Designed to replace factory clutch mounting bracket. (see picture below)
     5. May fit other makes & models
This PMR Barswitch fits all brand of motorcycles with the clutch assemblies for 7/8 handle bars made by Nissin (look on the back of your assembly you should see the name NISSIN somewhere)
Home
Contact info
Links
pmrweb045021.gif
Email
About Us
check2.gif
Installation Instructions
pmrweb001019.jpg
Your One Stop Motorcycle Speed Shop
pmrweb045019.jpg
pmrweb045013.jpg
pmrweb045018.jpg
pmrweb045017.jpg
pmrweb045016.jpg
pmrweb045015.jpg
$79.95
pmrweb006004.gif
Patents Pending
$69.95
pmrweb006004.gif
$89.95
pmrweb006004.gif
pmrweb006004.gif
$39.95
pmrweb006004.gif
Patents Pending
pmrweb045012.jpg
$79.95
pmrweb006004.gif
Single Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
PM-53 can be used on clutch or brake side with 32mm bolt spacing.
Bikes that we know it fits both clutch and brake side.
Hayabusa, ZX14
Bikes that it fits brake side
Hayabusa, ZX14, GSXR's, ZX10, R1, R6, Katana, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
Patents Pending
pmrweb045014.jpg
pmrweb006004.gif
$89.95
pmrweb006004.gif
$89.95
pmrweb006004.gif
No picture yet
No picture yet
pmrweb045013.jpg
$79.95
pmrweb006004.gif
Patents Pending
pmrweb045012.jpg
$79.95
pmrweb006004.gif
pmrweb045011.gif
$69.95
pmrweb006004.gif
No picture yet
pmrweb045010.gif
PM-53 Stealth Single Barswitch Kit in Black
Single Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
PM-53A can be used on clutch or brake side with 32mm bolt spacing.
Bikes that we know it fits both clutch and brake side.
Hayabusa, ZX14
Bikes that it fits brake side
Hayabusa, ZX14, GSXR's, ZX10, R1, R6, Katana, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
Billet machined aluminum finish
PM-53A Billet Single Barswitch Kit
pmrweb045009.gif
Double Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
Bikes that it fits clutch side
Hayabusa, ZX14, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
PM-50 Stealth Double Barswitch Kit in Black
PM-50A Billet Double Barswitch Kit
Double Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
Bikes that it fits clutch side
Hayabusa, ZX14, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
Billet machined aluminum finish
Double Switch for 2 bolt Cable clutch with bolt center spacing of 36mm and handle bar diameter of 7/8 of an inch.
This is an odd bolt spacing and only fits a few models so please verify before ordering.
Bikes that it fits clutch side
ZX10R, ZX12R, 636, ZX6R
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
PM-57 Stealth Double Barswitch Kit in Black
PM-57A Billet Double Barswitch Kit
Double Switch for 2 bolt Cable clutch with bolt center spacing of 36mm and handle bar diameter of 7/8 of an inch.
This is an odd bolt spacing and only fits a few models so please verify before ordering.
Bikes that it fits clutch side
ZX10R, ZX12R, 636, ZX6R
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
pmrweb045008.gif
$79.95
Patents Pending
$79.95
Double Switch for Cable clutch with single pinch bolt on the bottom of the clutch mount.
Bikes that it fits clutch side
GSXRs, Katana, R1, R6
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
PM-49 Stealth Double Barswitch Kit in Black (cable clutch single bolt)
PM-49A Billet Double Barswitch Kit (cable clutch single bolt)
pmrweb045007.gif
Double Switch for Cable clutch with single pinch bolt on the bottom of the clutch mount.
Bikes that it fits clutch side
GSXRs, Katana, R1, R6
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
Patents Pending
Triple Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
Bikes that it fits clutch side
Hayabusa, ZX14, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
PM-54 Stealth Triple Barswitch Kit in Black
PM-54A Billet Triple Barswitch Kit
Triple Switch for Hydraulic clutch with bolt center spacing of 32mm and handle bar diameter of 7/8 of an inch.
Bikes that it fits clutch side
Hayabusa, ZX14, 07-08 GSXR1000
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
Billet machined aluminum finish
Many people have asked us to make a back barclamp so they can mount our barswitches or killswitches on any bike with a 7/8 diameter handlebar. So here it is! This will allow you to mount any killswitch or 2 bolt (hydraulic bolt pattern PM-53, PM-50, PM-54, PM-45, PM-47 etc) Barswitch made by PMR. Many people use this for drag bikes with no clutch lever or you can now add switches to dirtbikes or quads. We use this to mount switches on our KTM dritbike(see picture below). One switch is used for the 8" HID headlight and the other is used for the fan)
This is CNC machined and then black anodized to match the barswitches and killswitches.
PM-78B Black Barclamp
PM-55A Billet Triple Barswitch Kit (cable clutch single bolt)
Triple Switch for Cable clutch with single pinch bolt on the bottom of the clutch mount.
Bikes that it fits clutch side
GSXRs, Katana, R1, R6
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
pmrweb045006.gif
Patents Pending
All Products sold by PMR components are for racing use only and not to be used on public streets or highways
pmrweb045005.gif
pmrweb045004.jpg
pmrweb045003.jpg
pmrweb045002.gif
pmrweb045001.jpg
PM-78 Billet Barclamp
Same as above but machined aluminum finish. No Black Anodize!
$39.95
pmrweb006004.gif
Mounted on a KTM 525 XC-W
$89.95
pmrweb006004.gif
PM-55 Stealth Triple Barswitch Kit (cable clutch single bolt)
Triple Switch for Cable clutch with single pinch bolt on the bottom of the clutch mount.
Bikes that it fits clutch side
GSXRs, Katana, R1, R6
May fit other makes and models.
If you know an application that is not listed please let us know so we can help others.
This is not a cheap back clamp. It is quality! It is strong. It is CNC machined Aircraft aluminum then anodized to match the barswitches.