Installation Instructions for Reservoir covers

Contents:

 Cover and 2 screws (depending on part number there might be 2 covers and 4 screws)

 

 

First cover paint with plastic or a towel, you do not want to get brake or clutch fluid on any paint.

 

If you are installing polished covers try not to touch the polished surface, use the plastic they come wrapped in to protect the cover from scratches and finger prints.

 

1.      Remove stock cover.

2.       Install new cover. 

3.       Use new stainless screws.

4.       Do not over tighten screws.

5.       That was easy now do the same for the other cover (if your bike has two) 

 

 

 

If you have any questions please email us

Home
Contact info
Links
pmrweb038003.gif
Email
About Us
check2.gif
Installation Instructions
pmrweb001019.jpg
Your One Stop Motorcycle Speed Shop
pmrweb038001.gif