Pm-1
Black Anodized Triple Clamp with pockets
fits 99-07
$289.95
Hayabusa Triple Clamps:
Hayabusa street Triple Clamps
 1. This replaces the 2 piece stock unit (this is not just a top half replacement for the 2 piece stock unit).
 2. They fit all Suzuki Hayabusa's; allowing for the front end to be lowered if desired. The best design features are all here.
  1. CNC machined from 6061-T6 Aircraft Grade Aluminum, which is lighter and stronger than the stock
  2. All hardware is Stainless Steel
  3. Double pinch bolts on each fork leg
  4. Thicker than stock clamp for more rigid front end
  5. When installed; no interference with the upper fairing (clutch & brake levers do not hit when steering turns lock to lock)
  6. Steering lock still works
  7. Unit comes with a tube of loctite for all bolts
  1. A security torx wrench to remove the ignition switch is included
  2. Triple clamps do not come with Hayabusa logo anymore.
Pm-4
Polished Triple Clamp with pockets
fits 99-07
$289.95
pmrweb006014.gif
pmrweb006004.gif
pmrweb006013.gif
Installation instructions click here
Home
Contact info
Links
pmrweb006012.gif
Email
About Us
check2.gif
Installation Instructions
pmrweb001019.jpg
Your One Stop Motorcycle Speed Shop
pmrweb006010.jpg
pmrweb006009.jpg
pmrweb006008.jpg
pmrweb006007.jpg
pmrweb006006.jpg
pmrweb006005.jpg
Pm-101
Black Anodized Race Triple Clamp
$225.95
pmrweb006004.gif
Pm-104
Billet Race Triple Clamp
$225.95
pmrweb006004.gif
Pm-110
Black Anodized Dual Gauge Mount (for race triple clamp only)
with on-off ignition switch
$125.95
pmrweb006004.gif
Pm-114
Billet Dual Gauge Mount (for race triple clamp only)
with on-off ignition switch
$125.95
pmrweb006004.gif
Hayabusa Race Triple Clamps
  1. CNC machined from 7075-T6 Aircraft Grade Aluminum, for extreme strength
  2.  2. They fit all Suzuki Hayabusa's; Front end must be lowered to allow room for bar clamps. (approx. .75 of an inch)
     3. This replaces the 2 piece stock unit (this is not just a top half replacement for the 2 piece stock unit).
  3. All hardware is Stainless Steel
  4. When installed correctly; no interference with the upper fairing (clutch & brake levers do not hit when steering turns lock to lock)
  5. This triple clamp also requires After market Barclamps
  6.  7. Stock ignition swith must be removed or relocated for this triple clamp. (see gauge mount for optional on-off switch)
     8. Available in Black Anodize or Machined Billet finish.

Dual Gauge Mount with on-off ignition switch.
  1. Designed for all 2 1/16" gauges
  2.  2. Comes with on-off ignition switch and complete wiring instructions.
     3. CNC machined from 6061-T6 aircraft aluminum for lightness and strength.
     
Hayabusa Race Triple Clamps:
Hayabusa Street Triple Clamps:
All Products sold by PMR components are for racing use only and not to be used on public streets or highways
We do NOT stock all parts, some items are special order and can take extra time to ship. Call to check availability.
pmrweb006003.gif
pmrweb006002.jpg
pmrweb006001.jpg
Discontinued
Discontinued
Discontinued
Discontinued